- Description
Description
Tremco Tremproof 250 GC SL 18.9 L
Related Products
-
TREMproof 260 R 5-Gal
Typical applications for TREMproof 260 include foundation walls, retaining walls and most backfilled applications. TREMproof 260 is also designed for use in approved methane barrier applications. Contact Tremco Technical Services for additional information regarding methane barrier applications. – 18.9L – 5 Gal – Black
-
Tremco Drainmat 6000
TREMDrain 6000 is used in conjunction with TREMproof® waterproofing and Paraseal® Membranes. TREMDrain 6000 is designed for vertical and selected horizontal installations requiring high compressive strength and where high flow capacity is necessary.
-
Kryton Krystol T1
Krystol T1 is a surface applied crystalline slurry treatment that transforms new or existing concrete into a permanent waterproofing barrier.
Krystol T1 lowers the permeability of the concrete to protect against the ingress of water and waterborne chemicals. Since it becomes integral to the concrete, it can be applied to either the positive (wet) or negative (dry) side of the water pressure which allows reliable hydrostatic waterproofing protection and remediation for even the most difficult applications.
-
Henry CM100
Henry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
-
Colphene BSW
Thermofusible waterproofing membrane composed of SBS modified bitumen designed for blind side waterproofing in horizontal applications.
-
Tremco Primer Epoxy Kit
Tremco® Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes.
-
Vulkem 191 Primer (1-Gal)
Vulkem® Primer #191 is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. – 3.8L – 1 Gal
-
Vulkem 350 R
Vulkem 350 Base Coat is a single–component urethane membrane that bonds firmly to clean, dry concrete and metal. It retains its integrity even if substrate movement causes hair–line cracks of up to 1/16″ (1.5 mm). If cut or damaged, Vulkem 350 will prevent water migration between itself and the substrate. Vulkem 350 is available in roller (R) and in self–leveling (SL) grade for vertical and horizontal application.
-
Tremproof 250 GC R
TREMproof® 250GC is a rapid-curing, high-solids, VOC compliant modified polyurethane waterproofing membrane. It can be applied to damp and green concrete. TREMproof 250GC is a one-part moisture-curing elastomer available in three viscosities: Self-Leveling (SL), Roller (R) and Trowel (trowel intended for detailing work only). – 18.9L – 5 Gal – Black
-
Tremco Exoair 130 White
Tremco Exoair 130 White 18.9 L 5gal