Tremco Exoair 130 White 18.9 L 5gal
Soft Rod 1 1/2″ x 6′ length stick
Euclid Diamond Clear Vox (5-Gal)
Diamond Clear VOX is a VOC compliant, water-based acrylic curing and sealing compound. This product provides a quality cure to freshly placed interior or exterior concrete while assuring total resistance to yellowing from ultraviolet exposure. Diamond Clear Vox promotes proper hydration of cement in new concrete by preventing rapid loss of moisture. Used as a sealer, Diamond Clear Vox helps concrete repel water and gives surfaces a semi-gloss appearance.
Tremproof 250 GC R
TREMproof® 250GC is a rapid-curing, high-solids, VOC compliant modified polyurethane waterproofing membrane. It can be applied to damp and green concrete. TREMproof 250GC is a one-part moisture-curing elastomer available in three viscosities: Self-Leveling (SL), Roller (R) and Trowel (trowel intended for detailing work only). – 18.9L – 5 Gal – Black
Kryton Krystol Plug
As part of the Krystol Leak Repair System, Krystol Plug is a rapid-setting hydraulic cement product that when mixed with water is used to stop flowing water and repair leaking cracks, holes and joints in concrete. Krystol Plug sets hard within 2 minutes and has high-compressive strength, which allows it to stop water even under high-hydrostatic pressure. Stopping water flow then allows permanent repair of the leak using Krystol technology.
Henry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
Tremco Drainmat 6000
TREMDrain 6000 is used in conjunction with TREMproof® waterproofing and Paraseal® Membranes. TREMDrain 6000 is designed for vertical and selected horizontal installations requiring high compressive strength and where high flow capacity is necessary.
Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
Soft Rod 3/8″ x 2100′
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
Vulkem 350 R
Vulkem 350 Base Coat is a single–component urethane membrane that bonds firmly to clean, dry concrete and metal. It retains its integrity even if substrate movement causes hair–line cracks of up to 1/16″ (1.5 mm). If cut or damaged, Vulkem 350 will prevent water migration between itself and the substrate. Vulkem 350 is available in roller (R) and in self–leveling (SL) grade for vertical and horizontal application.