Kryton Krystol Plug
$119.45
As part of the Krystol Leak Repair System, Krystol Plug is a rapid-setting hydraulic cement product that when mixed with water is used to stop flowing water and repair leaking cracks, holes and joints in concrete. Krystol Plug sets hard within 2 minutes and has high-compressive strength, which allows it to stop water even under high-hydrostatic pressure. Stopping water flow then allows permanent repair of the leak using Krystol technology.
- Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Vulkem 350 R
Vulkem 350 Base Coat is a single–component urethane membrane that bonds firmly to clean, dry concrete and metal. It retains its integrity even if substrate movement causes hair–line cracks of up to 1/16″ (1.5 mm). If cut or damaged, Vulkem 350 will prevent water migration between itself and the substrate. Vulkem 350 is available in roller (R) and in self–leveling (SL) grade for vertical and horizontal application.
-
TREMproof 260 R 5-Gal
Typical applications for TREMproof 260 include foundation walls, retaining walls and most backfilled applications. TREMproof 260 is also designed for use in approved methane barrier applications. Contact Tremco Technical Services for additional information regarding methane barrier applications. – 18.9L – 5 Gal – Black
-
Tremproof 250 GC R
TREMproof® 250GC is a rapid-curing, high-solids, VOC compliant modified polyurethane waterproofing membrane. It can be applied to damp and green concrete. TREMproof 250GC is a one-part moisture-curing elastomer available in three viscosities: Self-Leveling (SL), Roller (R) and Trowel (trowel intended for detailing work only). – 18.9L – 5 Gal – Black
-
Planitop X
$27.60 -
Mapei Planiseal Plug 5-Gal
Ultra Quick-Setting Water Stop and Anchoring Mortar
Planiseal Plug is an ultra quick-setting mortar specially designed for stopping leaks, for repairing voids and pockets in concrete, and for anchoring. It is ideal for plugging active water leaks on horizontal and vertical concrete surfaces in interior or exterior applications. – 55 lb – Grey
-
Mapei Planiseal Plug 1-Gal
$13.54 -
Mapei Quick Patch 10lbs
Mapei Quick Patch 10 Lbs
-
Planiseal 88
Cement-Based Waterproofing Coating
Planiseal 88 is a one-component, polymer-modified, cementitious coating for waterproofing concrete and masonry surfaces. – 25kg – 55 lb – Grey
-
Vulkem 191 Primer (1-Gal)
Vulkem® Primer #191 is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. – 3.8L – 1 Gal
-
Mesh Membrane Tietex 272 – 40″
T326 GRADE (2.75 OZ) Firm-Finish Stitch Bonded Polyester Roofing Reinforcement Fabric, for Waterproofing – 40″ X 324′ ROLL.
Reviews
There are no reviews yet.