-
Tremco Drainmat 6000
$238.00TREMDrain 6000 is used in conjunction with TREMproof® waterproofing and Paraseal® Membranes. TREMDrain 6000 is designed for vertical and selected horizontal installations requiring high compressive strength and where high flow capacity is necessary.
-
Blueskin WP200 3′ x 66.7′
Call for PriceBlueskin® WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.
-
Colphene BSW
$132.50Thermofusible waterproofing membrane composed of SBS modified bitumen designed for blind side waterproofing in horizontal applications.
-
Paraseal GM/LG
$319.90Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
-
Paraseal LG
$164.00Paraseal® GM is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
-
Henry CM100
Call for PriceHenry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
-
TREMproof 260 – Drum
$1,065.00Typical applications for TREMproof 260 include foundation walls, retaining walls and most backfilled applications. TREMproof 260 is also designed for use in approved methane barrier applications. Contact Tremco Technical Services for additional information regarding methane barrier applications. – 52 gal
-
TREMproof 260 R 5-Gal
$155.00Typical applications for TREMproof 260 include foundation walls, retaining walls and most backfilled applications. TREMproof 260 is also designed for use in approved methane barrier applications. Contact Tremco Technical Services for additional information regarding methane barrier applications. – 18.9L – 5 Gal – Black
-
Tremproof 250 GC R
$252.00TREMproof® 250GC is a rapid-curing, high-solids, VOC compliant modified polyurethane waterproofing membrane. It can be applied to damp and green concrete. TREMproof 250GC is a one-part moisture-curing elastomer available in three viscosities: Self-Leveling (SL), Roller (R) and Trowel (trowel intended for detailing work only). – 18.9L – 5 Gal – Black
-
Rockwool Techton
Call for PriceROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system. 4″ and 2″ Inch Available. -
3M Fire Barrier Duct Wrap 615+
$325.00A fire resistant wrap consisting of a patented inorganic blanket encapsulated with a scrim-reinforced foil, used to fire rate commercial kitchen grease ducts an air ducts and provide an alternative to 1 or 2 hour fire resistant rated shaft enclosures. 24″x 25′
-
Self-Seal® Type-SSC Collars – 6″
$107.10Self-Seal® Type-SSC can be used to firestop solid or cellular core Polyvinyl Chloride (PVC), solid or cellular core Acrylonitrile Butadiene Styrene (ABS), XFR 15-50 PVC, Chlorinated Polyvinyl Chloride (CPVC), and Flame Retardant Polypropylene (FRPP) closed or vented pipe penetrations. Solid core PVC, XFR 15-50 PVC vented and CPV sprinkler pipe penetrations firestopped with Self-Seal® Type-SSC meet the Canadian building code test requirement for a pressure differential of 50 Pa between the exposed and unexposed sides of concrete, drywall and wood floor-ceiling fire-rated assemblies.
