Vulkem 801
$313.43
Vulkem 801 is suitable for application to substrates that have had loose materials completely removed and major defects repaired and leveled by conventional methods. Vulkem 801 is also often used on tanks and ducts where a high performance protective coating is required that can handle both horizontal and vertical application as well as immersion. Vulkem 801 has excellent resistant to ponded water and to most acids, alkalis, salts, fats and solvents. Can be used in gutter and rainwater applications. – 5 Gal – Grey
- Description
- Reviews (0)
Description
Heavy-Duty, Aluminized Coating
Vulkem® 801 is a liquid applied one-part polyurethane coating system that has been formulated to have high tensile strength, tear strength and elongation, all in a viscosity grade that can be used horizontally and vertically. This coating forms a tough, weather resistant, waterproof, elastomeric coating for application on decks that require a weather-resistant coating but will receive minimal abrasive wear. In addition, Vulkem 801 is also used as a tank lining for non-potable applications such as fire suppression cisterns as well as a lining membrane in cooling towers, among other applications.
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Master Seal M 200 Base Coat
MasterSeal M 200 – Trafficable Waterproof coating system for park decks, pedestrian areas and roofs. – 5 Gal – Grey
-
Vulkem 351
Vulkem 350/351 is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system. – 5 Gal
-
Master Seal M 265
MasterSeal® M 265 is a two component polyurethane membrane waterproofer for use either. Low VOC Base Coat
interior or exterior. – 5 Gal – Gray
-
Reemay Mesh
Tremco® Reinforcing Fabric is used to reinforce fluid-applied membranes in multi-lift applications. – 84″ x 675′
-
Vulkem 360 NF Catalyst
Tremco Vulkem 360 NF Catalyst 131ml
-
Master Seal TC 225 Gray
MasterSeal TC 225 – A UV resistant coating for PU waterproofing membranes
Formerly: Sonoguard topcoat. -
Vulkem 951 NF Kit
Vulkem 350/950NF/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.
Available: Black, Beige, Limestone, Maple, White, Slate Gray
-
Vulkem 360NF
Vulkem 360NF/351NF is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system. – 5 Gal – Gray
-
Vulkem 45 SSL
Semi-Self-Leveling Sealant, Single-Component, Polyurethane Sealant
Vulkem® 45SSL is a semi-self-leveling, single-component, moisture-curing, low-modulus, polyurethane sealant. -
Vulkem 191 Primer (5-Gal)
Vulkem® Primer #191 is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. -18.9L – 5 Gal
Reviews
There are no reviews yet.