Tremproof 250 GC R
$252.00
TREMproof® 250GC is a rapid-curing, high-solids, VOC compliant modified polyurethane waterproofing membrane. It can be applied to damp and green concrete. TREMproof 250GC is a one-part moisture-curing elastomer available in three viscosities: Self-Leveling (SL), Roller (R) and Trowel (trowel intended for detailing work only). – 18.9L – 5 Gal – Black
- Description
- Reviews (0)
Description
TREMproof 250GC is designed for use on backfilled walls, split slab applications, planters and submerged conditions.
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Kryton Krystol T1
Krystol T1 is a surface applied crystalline slurry treatment that transforms new or existing concrete into a permanent waterproofing barrier.
Krystol T1 lowers the permeability of the concrete to protect against the ingress of water and waterborne chemicals. Since it becomes integral to the concrete, it can be applied to either the positive (wet) or negative (dry) side of the water pressure which allows reliable hydrostatic waterproofing protection and remediation for even the most difficult applications.
-
TREMproof 260 – Drum
Typical applications for TREMproof 260 include foundation walls, retaining walls and most backfilled applications. TREMproof 260 is also designed for use in approved methane barrier applications. Contact Tremco Technical Services for additional information regarding methane barrier applications. – 52 gal
-
Mapei Planiseal Plug 5-Gal
Ultra Quick-Setting Water Stop and Anchoring Mortar
Planiseal Plug is an ultra quick-setting mortar specially designed for stopping leaks, for repairing voids and pockets in concrete, and for anchoring. It is ideal for plugging active water leaks on horizontal and vertical concrete surfaces in interior or exterior applications. – 55 lb – Grey
-
Kryton Krystol Plug
As part of the Krystol Leak Repair System, Krystol Plug is a rapid-setting hydraulic cement product that when mixed with water is used to stop flowing water and repair leaking cracks, holes and joints in concrete. Krystol Plug sets hard within 2 minutes and has high-compressive strength, which allows it to stop water even under high-hydrostatic pressure. Stopping water flow then allows permanent repair of the leak using Krystol technology.
-
Euclid Diamond Clear Vox (5-Gal)
Diamond Clear VOX is a VOC compliant, water-based acrylic curing and sealing compound. This product provides a quality cure to freshly placed interior or exterior concrete while assuring total resistance to yellowing from ultraviolet exposure. Diamond Clear Vox promotes proper hydration of cement in new concrete by preventing rapid loss of moisture. Used as a sealer, Diamond Clear Vox helps concrete repel water and gives surfaces a semi-gloss appearance.
-
Henry CM100
Henry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
-
Paraseal LG
Paraseal® GM is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
-
Kryton Krystol Repair Grout
As part of the Krystol Leak Repair System, Krystol Repair Grout is a crystalline concrete waterproofing product that stops the flow of water to permanently repair leaking cracks, holes and joints in concrete, and can also be used to resurface and waterproof defective, damaged or deteriorating concrete. The grout employs advanced fiber technology and shrinkage controlling additives to prevent cracking.
-
Vulkem 191 Primer (1-Gal)
Vulkem® Primer #191 is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. – 3.8L – 1 Gal
-
Planiseal 88
Cement-Based Waterproofing Coating
Planiseal 88 is a one-component, polymer-modified, cementitious coating for waterproofing concrete and masonry surfaces. – 25kg – 55 lb – Grey
Reviews
There are no reviews yet.