Vulkem 350 SL
$235.00
- Description
Description
Tremco Vulkem 350 SL Gray Base Coat 18.9L Pail
Related Products
-
TREMstop IA+
TREMstop® IA+ is a high-performance, single-component, water-based, firestop sealant that will expand to fill the voids left when combustible materials burn and deteriorate in a fire.
-
Soft Rod 2″
Tremco Soft Rod 2″ 38 pc/case
-
Dymonic 100 – Anodized Aluminum
High Performance, High Movement Single-Component, Polyurethane Sealant
Dymonic® 100 is a high performance, medium-modulus, low-VOC, UV stable, non-sag polyurethane sealant. -
Vulkem 951 NF Kit
Vulkem 350/950NF/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.
Available: Black, Beige, Limestone, Maple, White, Slate Gray
-
TREMstop MP 9.25″
TREMstop® MP is a moldable putty preshaped into three pad sizes to fit different electrical boxes. Release liners are on both sides of the pad and one must be removed for installation.
-
Soft Rod 4″
Tremco Soft Rod – Sizes Available: 5/8, 7/8, 1 1/8, 3/8
-
Vulkem 45 SSL
Tremco Vulkem 45 SSL Grey 18.9 L Pail 5 Gal
-
ExoAir 110 AT – 6″
ExoAir® 110 is a composite 40-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 110 is 36 mils of self-adhering SBS rubberized asphalt laminated to 4 mils of white, cross-laminated, high-density polyethylene film and a siliconized release liner.
-
Vulkem 950 NF
Vulkem 350/950NF/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze. – 5 Gal
-
TREMstop MP 7.25″
TREMstop® MP is a moldable putty preshaped into three pad sizes to fit different electrical boxes. Release liners are on both sides of the pad and one must be removed for installation.