Vulkem 350 R
$235.00
Vulkem 350 Base Coat is a single–component urethane membrane that bonds firmly to clean, dry concrete and metal. It retains its integrity even if substrate movement causes hair–line cracks of up to 1/16″ (1.5 mm). If cut or damaged, Vulkem 350 will prevent water migration between itself and the substrate. Vulkem 350 is available in roller (R) and in self–leveling (SL) grade for vertical and horizontal application.
- Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Vulkem 360NF
Vulkem 360NF/351NF is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system. – 5 Gal – Gray
-
Dymeric FC 240 6 L
$104.25 -
TREMstop IA+
TREMstop® IA+ is a high-performance, single-component, water-based, firestop sealant that will expand to fill the voids left when combustible materials burn and deteriorate in a fire.
-
Tremco Exoair 110 AT – 18″
Tremco Exoair 110 AT 18″ X 75′ 1 Roll / Box
-
Vulkem 801
Vulkem 801 is suitable for application to substrates that have had loose materials completely removed and major defects repaired and leveled by conventional methods. Vulkem 801 is also often used on tanks and ducts where a high performance protective coating is required that can handle both horizontal and vertical application as well as immersion. Vulkem 801 has excellent resistant to ponded water and to most acids, alkalis, salts, fats and solvents. Can be used in gutter and rainwater applications. – 5 Gal – Grey
-
Dymonic 100 – Anodized Aluminum
High Performance, High Movement Single-Component, Polyurethane Sealant
Dymonic® 100 is a high performance, medium-modulus, low-VOC, UV stable, non-sag polyurethane sealant. -
ExoAir 110 AT – 6″
ExoAir® 110 is a composite 40-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 110 is 36 mils of self-adhering SBS rubberized asphalt laminated to 4 mils of white, cross-laminated, high-density polyethylene film and a siliconized release liner.
-
TREMstop Fyre-Sil GG
TREMstop® Fyre-Sil is a gun-grade, neutral-cure silicone sealant designed for use in firestop applications, including both joints and through-penetrations.
-
Reemay Mesh
Tremco® Reinforcing Fabric is used to reinforce fluid-applied membranes in multi-lift applications. – 84″ x 675′
-
TREMstop MP 7.25″
TREMstop® MP is a moldable putty preshaped into three pad sizes to fit different electrical boxes. Release liners are on both sides of the pad and one must be removed for installation.
Reviews
There are no reviews yet.