Kryton Krystol Repair Grout
$119.45
As part of the Krystol Leak Repair System, Krystol Repair Grout is a crystalline concrete waterproofing product that stops the flow of water to permanently repair leaking cracks, holes and joints in concrete, and can also be used to resurface and waterproof defective, damaged or deteriorating concrete. The grout employs advanced fiber technology and shrinkage controlling additives to prevent cracking.
- Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Kryton Krystol Plug
As part of the Krystol Leak Repair System, Krystol Plug is a rapid-setting hydraulic cement product that when mixed with water is used to stop flowing water and repair leaking cracks, holes and joints in concrete. Krystol Plug sets hard within 2 minutes and has high-compressive strength, which allows it to stop water even under high-hydrostatic pressure. Stopping water flow then allows permanent repair of the leak using Krystol technology.
-
Kryton Krystol T1
Krystol T1 is a surface applied crystalline slurry treatment that transforms new or existing concrete into a permanent waterproofing barrier.
Krystol T1 lowers the permeability of the concrete to protect against the ingress of water and waterborne chemicals. Since it becomes integral to the concrete, it can be applied to either the positive (wet) or negative (dry) side of the water pressure which allows reliable hydrostatic waterproofing protection and remediation for even the most difficult applications.
-
TREMproof 260 – Drum
Typical applications for TREMproof 260 include foundation walls, retaining walls and most backfilled applications. TREMproof 260 is also designed for use in approved methane barrier applications. Contact Tremco Technical Services for additional information regarding methane barrier applications. – 52 gal
-
Mapei Seal WR
Mapei Seal WR
-
Vulkem 191 Primer (1-Gal)
Vulkem® Primer #191 is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. – 3.8L – 1 Gal
-
Vulkem 350 SL
$235.00 -
Tremco Exoair 130 White
Tremco Exoair 130 White 18.9 L 5gal
-
Planiseal WR
$134.41 -
Planitop XS
$44.20 -
Henry CM100
Henry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
Reviews
There are no reviews yet.