Delta Drain Termination Bar – 1″ x 6′ 6″
$1.95
Delta Drain Termination Bar 1″ x 6’6″
- Description
Description
Delta Drain Termination Bar 1″ x 6’6″
Related Products
-
Soft Rod 1 1/2″ x 396′
$145.00Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
Available: 5/8, 7/8, 1 1/8, 3/8
-
Tremco Drainmat 6000
$238.00TREMDrain 6000 is used in conjunction with TREMproof® waterproofing and Paraseal® Membranes. TREMDrain 6000 is designed for vertical and selected horizontal installations requiring high compressive strength and where high flow capacity is necessary.
-
Henry Air-Bloc 31 MR
Call for PriceLiquid-applied with a trowel or spray, Henry/Bakor Air-Bloc® 31MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc®31MR cures to a tough, monolithic rubber-like membrane.
-
Blueskin SA – 4″ x 75′
$18.20Blueskin SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin SA is designed to install easily on a variety of prepared substrates.
-
ExoAir 120
$104.95EXOAIR® 120 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 120 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings. – 18.9L – 5 Gal – Black
-
Blueskin WP200 3′ x 66.7′
Call for PriceBlueskin® WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.
-
Henry (Bakor) Air-Bloc 17 MR
Call for PriceLiquid-applied by roller, brush or spray, Henry’s Air-Bloc® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces and can be applied down to 20°F (-6°C). Air-Bloc® 17MR cures to a tough, monolithic rubber-like membrane. – 18.9L – 5 Gal – Black
-
Soft Rod 1 1/8″ x 500′
$109.54Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
Available: 5/8, 7/8, 1 1/8, 3/8
-
Paraseal GM/LG
$319.90Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
-
Soft Rod 1 1/2″ x 6′ length stick
$2.45Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
