Blueskin Primer Aquatac – Water Base
$218.32
Bakor Blue Skin Primer Aquatac Water Base 18.9 L
- Description
Description
Bakor Blue Skin Primer Aquatac Water Base 18.9 L
Related Products
-
Vulkem 191 Primer (1-Gal)
Vulkem® Primer #191 is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. – 3.8L – 1 Gal
-
Blueskin SA – 12″ x 75′
Blueskin SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin SA is designed to install easily on a variety of prepared substrates.
-
Bakor Blueskin VP160
This fully adhered, vapor permeable membrane system eliminates air leakage while functioning as a water-resistant barrier and rain barrier. Bonded with a patented, permeable adhesive layer and split-back poly-release film, Blueskin® VP160 adheres to the wall substrate without mechanical attachment.
-
Henry CM100
Henry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
-
Blueskin Primer – 17L
Bakor Blue Skin Primer 17 L
-
Blueskin SA – 36″ x 75′
Blueskin SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin SA is designed to install easily on a variety of prepared substrates.
-
Blueskin SA – 18″ x 75′
Blueskin SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin SA is designed to install easily on a variety of prepared substrates.
-
Sopraseal Stick Primer 5-Gal
Solvent-based primer specifically designed to enhance the adhesion of SOPRASEAL self-adhesive membranes on walls. – 5 gal – Orange
-
Soprema Sopraseal Stick Primer – 1 Gal
Primer designed to enhance the adhesion of self-adhesive membranes on porous surfaces. It is composed of SBS synthetic rubbers, adhesion-enhancing resins and volatile solvents. It is used as a primer on surfaces such as concrete, metal, and wood. – 1 Gal – Red
-
TREMprime Non-Porous Primer
TREMprime® Non-Porous Primer is a low-VOC, water-based, quick-drying, one-part primer used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastic.