Bakor Aquatac Emulsion Primer – Aqua
Call for Price
- Description
- Reviews (0)
Description
Features
- Quick drying
- Environmentally friendly due to low VOC content
- Highly tacky film provides positive adhesion to membrane
- Non-flammable during application
- Easily applied by spray
- Water based, no solvent odors
- Specially designed to provide a high level of tack on vertical surfaces
Packaging
- Available in 5-gallon pails
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Henry CM100
Henry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
-
Blueskin Primer – 17L
Bakor Blue Skin Primer 17 L
-
Vulkem 191 Primer (1-Gal)
Vulkem® Primer #191 is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. – 3.8L – 1 Gal
-
Blueskin Primer – Spray Can
Bakor Blue Skin Primer Spray Can
-
Blueskin Primer
$45.47 -
Sopraseal Stick Primer 5-Gal
Solvent-based primer specifically designed to enhance the adhesion of SOPRASEAL self-adhesive membranes on walls. – 5 gal – Orange
-
Tremco Primer Epoxy Kit
Tremco® Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes.
-
Vulkem 191 Primer (5-Gal)
Vulkem® Primer #191 is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. -18.9L – 5 Gal
-
TREMprime Non-Porous Primer
TREMprime® Non-Porous Primer is a low-VOC, water-based, quick-drying, one-part primer used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastic.
-
Soprema Sopraseal Stick Primer – 1 Gal
Primer designed to enhance the adhesion of self-adhesive membranes on porous surfaces. It is composed of SBS synthetic rubbers, adhesion-enhancing resins and volatile solvents. It is used as a primer on surfaces such as concrete, metal, and wood. – 1 Gal – Red
Reviews
There are no reviews yet.