-
Vulkem 350NF R
Vulkem® 350/351 is a composite waterproofing system comprised of toughcuring liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 350/351 may be used to apply a seamless, monolithic waterproof membrane to concrete and primed metal surfaces.
-
Master Seal M 200 Base Coat
MasterSeal M 200 – Trafficable Waterproof coating system for park decks, pedestrian areas and roofs. – 5 Gal – Grey
-
Vulkem 351
Vulkem 350/351 is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system. – 5 Gal
-
Master Seal TC 225 Gray
MasterSeal TC 225 – A UV resistant coating for PU waterproofing membranes
Formerly: Sonoguard topcoat. -
Vulkem 350 R
Vulkem 350 Base Coat is a single–component urethane membrane that bonds firmly to clean, dry concrete and metal. It retains its integrity even if substrate movement causes hair–line cracks of up to 1/16″ (1.5 mm). If cut or damaged, Vulkem 350 will prevent water migration between itself and the substrate. Vulkem 350 is available in roller (R) and in self–leveling (SL) grade for vertical and horizontal application.
-
Vulkem 360 NF Catalyst
Tremco Vulkem 360 NF Catalyst 131ml
-
Master Seal Coating M 200 SLope Grade
Master Seal Coating M 200 Base Coat Slope Grade 5 Gal Pail
-
Master Seal TC 295
MasterSeal® TC 295 is a two component polyurethane aliphatic top coat for use interior or exterior. Low VOC Top Coat UV stable
Formerly: Conipur 295 UV. -
Master Seal TC 275
MasterSeal TC 275 – A UV resistant coating for PU waterproofing membranes. Low VOC Top Coat
Formerly: Conipur 275. – 5 Gal – Charcoal
-
Master Seal M 265
MasterSeal® M 265 is a two component polyurethane membrane waterproofer for use either. Low VOC Base Coat
interior or exterior. – 5 Gal – Gray
-
Vulkem 191 Primer (5-Gal)
Vulkem® Primer #191 is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. -18.9L – 5 Gal
-
Vulkem 801
Vulkem 801 is suitable for application to substrates that have had loose materials completely removed and major defects repaired and leveled by conventional methods. Vulkem 801 is also often used on tanks and ducts where a high performance protective coating is required that can handle both horizontal and vertical application as well as immersion. Vulkem 801 has excellent resistant to ponded water and to most acids, alkalis, salts, fats and solvents. Can be used in gutter and rainwater applications. – 5 Gal – Grey